FT ECU Inc. » 2014-2021 Yamaha FZ/MT-09 Data Link Bench ECU Flashing Kit (U.S.)

2014-2021 Yamaha FZ/MT-09 Data Link Bench ECU Flashing Kit (U.S.)

$450.00

Zestaw do flashowania ławki ECU łącza danych Zawiera:

-FT Kabel USB interfejsu ECU DataLink
-Bench Flashing Harness do flashowania twojego ECU poza rowerem
-Zasilacz do flashowania na stole warsztatowym (zgodny z gniazdkami zasilania w USA i Kanadzie)
-FT Licencja ECU pozwalająca na nieograniczoną liczbę błysków dla jednego ECU

UWAGA: Stanowisko flashowania ECU Yamaha FZ / MT-09 może spowodować sprawdzenie lampki kontrolnej silnika, ponieważ ECU jest zasilane z zewnętrznego źródła. Do skasowania tego kodu błędu w ECU wymagany będzie skaner OBDII i wiązka adaptera .

Znajdź swój numer części ECU poniżej

Wskazówka: klikaj elementy, aby przeglądać aktualnie zdefiniowane parametry

14-16 FZ09 - 1RC-8591A-20(US) StockECU.ftm

ECU Mapping
- Fuel
  - TPS vs RPM
    - TPS vs RPM Cyl1
    - TPS vs RPM Cyl2
    - TPS vs RPM Cyl3
  - MAP vs RPM
    - MAP vs RPM Cyl1
    - MAP vs RPM Cyl2
    - MAP vs RPM Cyl3
  - Accel Enrichment
    - DeltaTPS vs RPM - Gear 0
    - DeltaTPS vs RPM - Gear 1 2
    - DeltaTPS vs RPM - Gear 3 4 5 6
  - Inj. Timing
    - INJ Adv.
- Ignition
  - IGN Advance
    - Gear-Map# - Mode STD
    - Gear-Map# - Mode A
    - Gear-Map# - Mode B
    - Gear N
    - Map#1
    - Map#2
    - Map#3
    - Map#4
    - Map#5
    - Map#6
    - Map#7
    - Map#8
    - Map#9
  - Volt-Dwell
    - Volt-Dwell
- Idle Speed
  - Warmup/Base Idle
    - ECT vs RPM Idle speed
  - SAP idle comp
    - SAP pressure comp
- Throttle-by-wire
  - Gear-Map#
  - ETV Base Maps
    - STD Mode
      - STD Map#0
      - STD Map#1
      - STD Map#2
      - STD Map#3
      - STD Map#4
      - STD Map#5
      - STD Map#6
    - A Mode
      - A Map#0
      - A Map#1
      - A Map#2
      - A Map#3
      - A Map#4
      - A Map#5
      - A Map#6
    - B Mode
      - B Map#0
      - B Map#1
      - B Map#2
      - B Map#3
      - B Map#4
      - B Map#5
      - B Map#6
  - ETV Decel Maps
    - STD Mode
      - STD GearN
      - STD Gear1
      - STD Gear2
      - STD Gear3
      - STD Gear4
      - STD Gear5
      - STD Gear6
    - A Mode
      - A GearN
      - A Gear1
      - A Gear2
      - A Gear3
      - A Gear4
      - A Gear5
      - A Gear6
    - B Mode
      - B GearN
      - B Gear1
      - B Gear2
      - B Gear3
      - B Gear4
      - B Gear5
      - B Gear6
ECU Settings
- Rev Limiters
- Fan Temps
- Disable Top Speed Limiter
- Disable AIS Valve
- Default to A-Mode
- Disable_INJ_decel_cut
- Disable Closed Loop
ECU Modules
- PC Fuel Import
- Quickshifter
Paid Features
- ActiveTune AFR Kit

2017 FZ09 - BS2-8591A-10(US) StockECU.ftm

ECU Mapping
- Fuel
  - MAP vs RPM
    - MAP vs RPM Cyl1
    - MAP vs RPM Cyl2
    - MAP vs RPM Cyl3
  - TPS vs RPM
    - TPS vs RPM Cyl1
    - TPS vs RPM Cyl2
    - TPS vs RPM Cyl3
  - Accel Enrichment
    - DeltaTPS vs RPM - Gear 0
    - DeltaTPS vs RPM - Gear 1 2
    - DeltaTPS vs RPM - Gear 3 4 5 6
  - Inj. Timing
    - INJ Adv.
- Ignition
  - Gear-Map# - Mode STD
  - Gear-Map# - Mode A
  - Gear-Map# - Mode B
  - IGN Advance
    - Gear N
    - Map#1
    - Map#2
    - Map#3
    - Map#4
    - Map#5
    - Map#6
    - Map#7
    - Map#8
    - Map#9
  - Volt-Dwell
    - Volt-Dwell
- Idle Speed
  - Warmup/Base Idle
    - ECT vs RPM Idle speed
  - SAP idle comp
    - SAP pressure comp
- Throttle-by-wire
  - Gear-Map#
  - ETV Base Maps
    - STD Mode
      - STD Map#0
      - STD Map#1
      - STD Map#2
      - STD Map#3
      - STD Map#4
      - STD Map#5
      - STD Map#6
    - A Mode
      - A Map#0
      - A Map#1
      - A Map#2
      - A Map#3
      - A Map#4
      - A Map#5
      - A Map#6
    - B Mode
      - B Map#0
      - B Map#1
      - B Map#2
      - B Map#3
      - B Map#4
      - B Map#5
      - B Map#6
  - ETV Decel Maps
    - STD Mode
      - STD GearN
      - STD Gear1
      - STD Gear2
      - STD Gear3
      - STD Gear4
      - STD Gear5
      - STD Gear6
    - A Mode
      - A GearN
      - A Gear1
      - A Gear2
      - A Gear3
      - A Gear4
      - A Gear5
      - A Gear6
    - B Mode
      - B GearN
      - B Gear1
      - B Gear2
      - B Gear3
      - B Gear4
      - B Gear5
      - B Gear6
ECU Settings
- Diagnostic Code Manager
- Fan Temps
- Disable Top Speed Limiter
- Default to A-Mode
- Decel Fuel Cut
- Disable Closed Loop
ECU Modules
- PC Fuel Import
- Quickshifter
Paid Features
- ActiveTune AFR Kit

14-16 FZ09 - 1RC-8591A-21(US) StockECU.ftm

ECU Mapping
- Fuel
  - TPS vs RPM
    - TPS vs RPM Cyl1
    - TPS vs RPM Cyl2
    - TPS vs RPM Cyl3
  - MAP vs RPM
    - MAP vs RPM Cyl1
    - MAP vs RPM Cyl2
    - MAP vs RPM Cyl3
  - Accel Enrichment
    - DeltaTPS vs RPM - Gear 0
    - DeltaTPS vs RPM - Gear 1 2
    - DeltaTPS vs RPM - Gear 3 4 5 6
  - Inj. Timing
    - INJ Adv.
- Ignition
  - IGN Advance
    - Gear-Map# - Mode STD
    - Gear-Map# - Mode A
    - Gear-Map# - Mode B
    - Gear N
    - Map#1
    - Map#2
    - Map#3
    - Map#4
    - Map#5
    - Map#6
    - Map#7
    - Map#8
    - Map#9
  - Volt-Dwell
    - Volt-Dwell
- Idle Speed
  - Warmup/Base Idle
    - ECT vs RPM Idle speed
  - SAP idle comp
    - SAP pressure comp
- Throttle-by-wire
  - Gear-Map#
  - ETV Base Maps
    - STD Mode
      - STD Map#0
      - STD Map#1
      - STD Map#2
      - STD Map#3
      - STD Map#4
      - STD Map#5
      - STD Map#6
    - A Mode
      - A Map#0
      - A Map#1
      - A Map#2
      - A Map#3
      - A Map#4
      - A Map#5
      - A Map#6
    - B Mode
      - B Map#0
      - B Map#1
      - B Map#2
      - B Map#3
      - B Map#4
      - B Map#5
      - B Map#6
  - ETV Decel Maps
    - STD Mode
      - STD GearN
      - STD Gear1
      - STD Gear2
      - STD Gear3
      - STD Gear4
      - STD Gear5
      - STD Gear6
    - A Mode
      - A GearN
      - A Gear1
      - A Gear2
      - A Gear3
      - A Gear4
      - A Gear5
      - A Gear6
    - B Mode
      - B GearN
      - B Gear1
      - B Gear2
      - B Gear3
      - B Gear4
      - B Gear5
      - B Gear6
ECU Settings
- Rev Limiters
- Fan Temps
- Disable Top Speed Limiter
- Disable AIS Valve
- Default to A-Mode
- Disable_INJ_decel_cut
- Disable Closed Loop
ECU Modules
- PC Fuel Import
- Quickshifter
Paid Features
- ActiveTune AFR Kit

17-18 MT09 - BS2-8591A-00(EU) StockECU.ftm

ECU Mapping
- Fuel
  - MAP vs RPM
    - MAP vs RPM Cyl1
    - MAP vs RPM Cyl2
    - MAP vs RPM Cyl3
  - TPS vs RPM
    - TPS vs RPM Cyl1
    - TPS vs RPM Cyl2
    - TPS vs RPM Cyl3
  - Accel Enrichment
    - DeltaTPS vs RPM - Gear 0
    - DeltaTPS vs RPM - Gear 1 2
    - DeltaTPS vs RPM - Gear 3 4 5 6
  - Inj. Timing
    - INJ Adv.
- Ignition
  - Gear-Map# - Mode STD
  - Gear-Map# - Mode A
  - Gear-Map# - Mode B
  - IGN Advance
    - Gear N
    - Map#1
    - Map#2
    - Map#3
    - Map#4
    - Map#5
    - Map#6
    - Map#7
    - Map#8
    - Map#9
  - Volt-Dwell
    - Volt-Dwell
- Idle Speed
  - Warmup/Base Idle
    - ECT vs RPM Idle speed
  - SAP idle comp
    - SAP pressure comp
- Throttle-by-wire
  - Gear-Map#
  - ETV Base Maps
    - STD Mode
      - STD Map#0
      - STD Map#1
      - STD Map#2
      - STD Map#3
      - STD Map#4
      - STD Map#5
      - STD Map#6
    - A Mode
      - A Map#0
      - A Map#1
      - A Map#2
      - A Map#3
      - A Map#4
      - A Map#5
      - A Map#6
    - B Mode
      - B Map#0
      - B Map#1
      - B Map#2
      - B Map#3
      - B Map#4
      - B Map#5
      - B Map#6
  - ETV Decel Maps
    - STD Mode
      - STD GearN
      - STD Gear1
      - STD Gear2
      - STD Gear3
      - STD Gear4
      - STD Gear5
      - STD Gear6
    - A Mode
      - A GearN
      - A Gear1
      - A Gear2
      - A Gear3
      - A Gear4
      - A Gear5
      - A Gear6
    - B Mode
      - B GearN
      - B Gear1
      - B Gear2
      - B Gear3
      - B Gear4
      - B Gear5
      - B Gear6
ECU Settings
- Diagnostic Code Manager
- Fan Temps
- Disable Top Speed Limiter
- Default to A-Mode
- Decel Fuel Cut
- Disable Closed Loop
ECU Modules
- PC Fuel Import
- Quickshifter
Paid Features
- ActiveTune AFR Kit

14-16 MT09 - 1RC-8591A-00(EU) StockECU.ftm

ECU Mapping
- Fuel
  - TPS vs RPM
    - TPS vs RPM Cyl1
    - TPS vs RPM Cyl2
    - TPS vs RPM Cyl3
  - MAP vs RPM
    - MAP vs RPM Cyl1
    - MAP vs RPM Cyl2
    - MAP vs RPM Cyl3
  - Accel Enrichment
    - DeltaTPS vs RPM - Gear 0
    - DeltaTPS vs RPM - Gear 1 2
    - DeltaTPS vs RPM - Gear 3 4 5 6
  - Inj. Timing
    - INJ Adv.
- Ignition
  - IGN Advance
    - Gear-Map# - Mode STD
    - Gear-Map# - Mode A
    - Gear-Map# - Mode B
    - Gear N
    - Map#1
    - Map#2
    - Map#3
    - Map#4
    - Map#5
    - Map#6
    - Map#7
    - Map#8
    - Map#9
  - Volt-Dwell
    - Volt-Dwell
- Idle Speed
  - Warmup/Base Idle
    - ECT vs RPM Idle speed
  - SAP idle comp
    - SAP pressure comp
- Throttle-by-wire
  - ETV BaseMaps
    - Gear-Map#
    - STD Mode
      - STD Map#0
      - STD Map#1
      - STD Map#2
      - STD Map#3
      - STD Map#4
      - STD Map#5
      - STD Map#6
    - A Mode
      - A Map#0
      - A Map#1
      - A Map#2
      - A Map#3
      - A Map#4
      - A Map#5
      - A Map#6
    - B Mode
      - B Map#0
      - B Map#1
      - B Map#2
      - B Map#3
      - B Map#4
      - B Map#5
      - B Map#6
  - ETV DecelMaps
    - STD Mode
      - STD GearN
      - STD Gear1
      - STD Gear2
      - STD Gear3
      - STD Gear4
      - STD Gear5
      - STD Gear6
    - A Mode
      - A GearN
      - A Gear1
      - A Gear2
      - A Gear3
      - A Gear4
      - A Gear5
      - A Gear6
    - B Mode
      - B GearN
      - B Gear1
      - B Gear2
      - B Gear3
      - B Gear4
      - B Gear5
      - B Gear6
ECU Settings
- Fan Temps
- Disable Top Speed Limiter
- Disable AIS Valve
- Default to A-Mode
- Disable Closed Loop
- Disable_INJ_decel_cut
ECU Modules
- PC Fuel Import
- Quickshifter
Paid Features
- ActiveTune Kit

14-16 MT09 - 2DR-8591A-60(JP) StockECU.ftm

ECU Mapping
- Fuel
  - TPS vs RPM
    - Cyl - 1
    - Cyl - 2
    - Cyl - 3
  - MAP vs RPM
    - Cyl - 1
    - Cyl - 2
    - Cyl - 3
  - Accel Enrichment
    - DeltaTPS vs RPM - Gear 0
    - DeltaTPS vs RPM - Gear 1 2
    - DeltaTPS vs RPM - Gear 3 4 5 6
  - Inj. Timing
    - INJ Adv.
- Ignition
  - IGN Advance
    - Gear-Map# - Mode STD
    - Gear-Map# - Mode A
    - Gear-Map# - Mode B
    - Gear N
    - Map#1
    - Map#2
    - Map#3
    - Map#4
    - Map#5
    - Map#6
    - Map#7
    - Map#8
    - Map#9
  - Volt-Dwell
    - Volt-Dwell
- Idle Speed
  - Warmup/Base Idle
    - ECT vs RPM Idle speed
  - SAP idle comp
    - SAP pressure comp
- Throttle-by-wire
  - ETV BaseMaps
    - Gear-Map#
    - STD Mode
      - STD Map#0
      - STD Map#1
      - STD Map#2
      - STD Map#3
      - STD Map#4
      - STD Map#5
      - STD Map#6
    - A Mode
      - A Map#0
      - A Map#1
      - A Map#2
      - A Map#3
      - A Map#4
      - A Map#5
      - A Map#6
    - B Mode
      - B Map#0
      - B Map#1
      - B Map#2
      - B Map#3
      - B Map#4
      - B Map#5
      - B Map#6
  - ETV Decel Comp
    - STD Mode
      - STD GearN
      - STD Gear1
      - STD Gear2
      - STD Gear3
      - STD Gear4
      - STD Gear5
      - STD Gear6
    - A Mode
      - A GearN
      - A Gear1
      - A Gear2
      - A Gear3
      - A Gear4
      - A Gear5
      - A Gear6
    - B Mode
      - B GearN
      - B Gear1
      - B Gear2
      - B Gear3
      - B Gear4
      - B Gear5
      - B Gear6
ECU Settings
- Diagnostic Code Manager
- Fan Temps
- Disable Top Speed Limiter
- Disable AIS Valve
- Default to A-Mode
- Disable_INJ_decel_cut
ECU Modules
- PC Fuel Import
- Quickshifter
Paid Features
- ActiveTune Kit

14-16 MT09 - 2DR-8591A-00(EU) StockECU.ftm

ECU Mapping
- Fuel
  - TPS vs RPM
    - TPS vs RPM Cyl1
    - TPS vs RPM Cyl2
    - TPS vs RPM Cyl3
  - MAP vs RPM
    - MAP vs RPM Cyl1
    - MAP vs RPM Cyl2
    - MAP vs RPM Cyl3
  - Accel Enrichment
    - DeltaTPS vs RPM - Gear 0
    - DeltaTPS vs RPM - Gear 1 2
    - DeltaTPS vs RPM - Gear 3 4 5 6
  - Inj. Timing
    - INJ Adv.
- Ignition
  - IGN Advance
    - Gear-Map# - Mode STD
    - Gear-Map# - Mode A
    - Gear-Map# - Mode B
    - Gear N
    - Map#1
    - Map#2
    - Map#3
    - Map#4
    - Map#5
    - Map#6
    - Map#7
    - Map#8
    - Map#9
  - Volt-Dwell
    - Volt-Dwell
- Idle Speed
  - Warmup/Base Idle
    - ECT vs RPM Idle speed
  - SAP idle comp
    - SAP pressure comp
- Throttle-by-wire
  - ETV BaseMaps
    - Gear-Map#
    - STD Mode
      - STD Map#0
      - STD Map#1
      - STD Map#2
      - STD Map#3
      - STD Map#4
      - STD Map#5
      - STD Map#6
    - A Mode
      - A Map#0
      - A Map#1
      - A Map#2
      - A Map#3
      - A Map#4
      - A Map#5
      - A Map#6
    - B Mode
      - B Map#0
      - B Map#1
      - B Map#2
      - B Map#3
      - B Map#4
      - B Map#5
      - B Map#6
  - ETV DecelMaps
    - STD Mode
      - STD GearN
      - STD Gear1
      - STD Gear2
      - STD Gear3
      - STD Gear4
      - STD Gear5
      - STD Gear6
    - A Mode
      - A GearN
      - A Gear1
      - A Gear2
      - A Gear3
      - A Gear4
      - A Gear5
      - A Gear6
    - B Mode
      - B GearN
      - B Gear1
      - B Gear2
      - B Gear3
      - B Gear4
      - B Gear5
      - B Gear6
ECU Settings
- Fan Temps
- Disable Top Speed Limiter
- Disable AIS Valve
- Default to A-Mode
- Disable Closed Loop
- Disable_INJ_decel_cut
ECU Modules
- PC Fuel Import
- Quickshifter
Paid Features
- ActiveTune Kit

2020 MT09 - BS2-8591A-11(US) StockECU.ftm

ECU Mapping
- Fuel
  - MAP vs RPM
    - MAP vs RPM Cyl1
    - MAP vs RPM Cyl2
    - MAP vs RPM Cyl3
  - TPS vs RPM
    - TPS vs RPM Cyl1
    - TPS vs RPM Cyl2
    - TPS vs RPM Cyl3
  - Accel Enrichment
    - DeltaTPS vs RPM - Gear 0
    - DeltaTPS vs RPM - Gear 1 2
    - DeltaTPS vs RPM - Gear 3 4 5 6
  - Inj. Timing
    - INJ Adv.
- Ignition
  - Gear-Map# - Mode STD
  - Gear-Map# - Mode A
  - Gear-Map# - Mode B
  - IGN Advance
    - Gear N
    - Map#1
    - Map#2
    - Map#3
    - Map#4
    - Map#5
    - Map#6
    - Map#7
    - Map#8
    - Map#9
  - Volt-Dwell
    - Volt-Dwell
- Idle Speed
  - Warmup/Base Idle
    - ECT vs RPM Idle speed
  - SAP idle comp
    - SAP pressure comp
- Throttle-by-wire
  - Gear-Map#
  - ETV Base Maps
    - STD Mode
      - STD Map#0
      - STD Map#1
      - STD Map#2
      - STD Map#3
      - STD Map#4
      - STD Map#5
      - STD Map#6
    - A Mode
      - A Map#0
      - A Map#1
      - A Map#2
      - A Map#3
      - A Map#4
      - A Map#5
      - A Map#6
    - B Mode
      - B Map#0
      - B Map#1
      - B Map#2
      - B Map#3
      - B Map#4
      - B Map#5
      - B Map#6
  - ETV Decel Maps
    - STD Mode
      - STD GearN
      - STD Gear1
      - STD Gear2
      - STD Gear3
      - STD Gear4
      - STD Gear5
      - STD Gear6
    - A Mode
      - A GearN
      - A Gear1
      - A Gear2
      - A Gear3
      - A Gear4
      - A Gear5
      - A Gear6
    - B Mode
      - B GearN
      - B Gear1
      - B Gear2
      - B Gear3
      - B Gear4
      - B Gear5
      - B Gear6
ECU Settings
- Diagnostic Code Manager
- Fan Temps
- Disable Top Speed Limiter
- Default to A-Mode
- Decel Fuel Cut
- Disable Closed Loop
ECU Modules
- PC Fuel Import
- Quickshifter
Paid Features
- ActiveTune AFR Kit

14-16 MT09 - 2DR-8591A-40(EU) StockECU.ftm

ECU Mapping
- Fuel
  - TPS vs RPM
    - Cyl - 1
    - Cyl - 2
    - Cyl - 3
  - MAP vs RPM
    - Cyl - 1
    - Cyl - 2
    - Cyl - 3
  - Accel Enrichment
    - DeltaTPS vs RPM - Gear 0
    - DeltaTPS vs RPM - Gear 1 2
    - DeltaTPS vs RPM - Gear 3 4 5 6
  - Inj. Timing
    - INJ Adv.
- Ignition
  - IGN Advance
    - Gear-Map# - Mode STD
    - Gear-Map# - Mode A
    - Gear-Map# - Mode B
    - Gear N
    - Map#1
    - Map#2
    - Map#3
    - Map#4
    - Map#5
    - Map#6
    - Map#7
    - Map#8
    - Map#9
  - Volt-Dwell
    - Volt-Dwell
- Idle Speed
  - Warmup/Base Idle
    - ECT vs RPM Idle speed
  - SAP idle comp
    - SAP pressure comp
- Throttle-by-wire
  - ETV BaseMaps
    - Gear-Map#
    - STD Mode
      - STD Map#0
      - STD Map#1
      - STD Map#2
      - STD Map#3
      - STD Map#4
      - STD Map#5
      - STD Map#6
    - A Mode
      - A Map#0
      - A Map#1
      - A Map#2
      - A Map#3
      - A Map#4
      - A Map#5
      - A Map#6
    - B Mode
      - B Map#0
      - B Map#1
      - B Map#2
      - B Map#3
      - B Map#4
      - B Map#5
      - B Map#6
  - ETV Decel Comp
    - STD Mode
      - STD GearN
      - STD Gear1
      - STD Gear2
      - STD Gear3
      - STD Gear4
      - STD Gear5
      - STD Gear6
    - A Mode
      - A GearN
      - A Gear1
      - A Gear2
      - A Gear3
      - A Gear4
      - A Gear5
      - A Gear6
    - B Mode
      - B GearN
      - B Gear1
      - B Gear2
      - B Gear3
      - B Gear4
      - B Gear5
      - B Gear6
ECU Settings
- Diagnostic Code Manager
- Fan Temps
- Disable Top Speed Limiter
- Disable AIS Valve
- Default to A-Mode
- Disable_INJ_decel_cut
ECU Modules
- PC Fuel Import
- Quickshifter
Paid Features
- ActiveTune Kit

14-16 MT09 - 1RC-8591A-01(MYL) StockECU.ftm

ECU Mapping
- Fuel
  - TPS vs RPM
    - TPS vs RPM Cyl1
    - TPS vs RPM Cyl2
    - TPS vs RPM Cyl3
  - MAP vs RPM
    - MAP vs RPM Cyl1
    - MAP vs RPM Cyl2
    - MAP vs RPM Cyl3
  - Accel Enrichment
    - DeltaTPS vs RPM - Gear 0
    - DeltaTPS vs RPM - Gear 1 2
    - DeltaTPS vs RPM - Gear 3 4 5 6
  - Inj. Timing
    - INJ Adv.
- Ignition
  - IGN Advance
    - Gear-Map# - Mode STD
    - Gear-Map# - Mode A
    - Gear-Map# - Mode B
    - Gear N
    - Map#1
    - Map#2
    - Map#3
    - Map#4
    - Map#5
    - Map#6
    - Map#7
    - Map#8
    - Map#9
  - Volt-Dwell
    - Volt-Dwell
- Idle Speed
  - Warmup/Base Idle
    - ECT vs RPM Idle speed
  - SAP idle comp
    - SAP pressure comp
- Throttle-by-wire
  - ETV BaseMaps
    - Gear-Map#
    - STD Mode
      - STD Map#0
      - STD Map#1
      - STD Map#2
      - STD Map#3
      - STD Map#4
      - STD Map#5
      - STD Map#6
    - A Mode
      - A Map#0
      - A Map#1
      - A Map#2
      - A Map#3
      - A Map#4
      - A Map#5
      - A Map#6
    - B Mode
      - B Map#0
      - B Map#1
      - B Map#2
      - B Map#3
      - B Map#4
      - B Map#5
      - B Map#6
  - ETV DecelMaps
    - STD Mode
      - STD GearN
      - STD Gear1
      - STD Gear2
      - STD Gear3
      - STD Gear4
      - STD Gear5
      - STD Gear6
    - A Mode
      - A GearN
      - A Gear1
      - A Gear2
      - A Gear3
      - A Gear4
      - A Gear5
      - A Gear6
    - B Mode
      - B GearN
      - B Gear1
      - B Gear2
      - B Gear3
      - B Gear4
      - B Gear5
      - B Gear6
ECU Settings
- Fan Temps
- Disable Top Speed Limiter
- Disable AIS Valve
- Default to A-Mode
- Disable Closed Loop
- Disable_INJ_decel_cut
ECU Modules
- PC Fuel Import
- Quickshifter
Paid Features
- ActiveTune Kit

17-18 MT09 - BS2-8591A-10(US) StockECU.ftm

ECU Mapping
- Fuel
  - MAP vs RPM
    - MAP vs RPM Cyl1
    - MAP vs RPM Cyl2
    - MAP vs RPM Cyl3
  - TPS vs RPM
    - TPS vs RPM Cyl1
    - TPS vs RPM Cyl2
    - TPS vs RPM Cyl3
  - Accel Enrichment
    - DeltaTPS vs RPM - Gear 0
    - DeltaTPS vs RPM - Gear 1 2
    - DeltaTPS vs RPM - Gear 3 4 5 6
  - Inj. Timing
    - INJ Adv.
- Ignition
  - Gear-Map# - Mode STD
  - Gear-Map# - Mode A
  - Gear-Map# - Mode B
  - IGN Advance
    - Gear N
    - Map#1
    - Map#2
    - Map#3
    - Map#4
    - Map#5
    - Map#6
    - Map#7
    - Map#8
    - Map#9
  - Volt-Dwell
    - Volt-Dwell
- Idle Speed
  - Warmup/Base Idle
    - ECT vs RPM Idle speed
  - SAP idle comp
    - SAP pressure comp
- Throttle-by-wire
  - Gear-Map#
  - ETV Base Maps
    - STD Mode
      - STD Map#0
      - STD Map#1
      - STD Map#2
      - STD Map#3
      - STD Map#4
      - STD Map#5
      - STD Map#6
    - A Mode
      - A Map#0
      - A Map#1
      - A Map#2
      - A Map#3
      - A Map#4
      - A Map#5
      - A Map#6
    - B Mode
      - B Map#0
      - B Map#1
      - B Map#2
      - B Map#3
      - B Map#4
      - B Map#5
      - B Map#6
  - ETV Decel Maps
    - STD Mode
      - STD GearN
      - STD Gear1
      - STD Gear2
      - STD Gear3
      - STD Gear4
      - STD Gear5
      - STD Gear6
    - A Mode
      - A GearN
      - A Gear1
      - A Gear2
      - A Gear3
      - A Gear4
      - A Gear5
      - A Gear6
    - B Mode
      - B GearN
      - B Gear1
      - B Gear2
      - B Gear3
      - B Gear4
      - B Gear5
      - B Gear6
ECU Settings
- Diagnostic Code Manager
- Fan Temps
- Disable Top Speed Limiter
- Default to A-Mode
- Decel Fuel Cut
- Disable Closed Loop
ECU Modules
- PC Fuel Import
- Quickshifter
Paid Features
- ActiveTune AFR Kit

2019 MT09 - BS2-8591A-20(JP) StockECU.ftm

ECU Mapping
- Fuel
  - MAP vs RPM
    - MAP vs RPM Cyl1
    - MAP vs RPM Cyl2
    - MAP vs RPM Cyl3
  - TPS vs RPM
    - TPS vs RPM Cyl1
    - TPS vs RPM Cyl2
    - TPS vs RPM Cyl3
  - Accel Enrichment
    - DeltaTPS vs RPM - Gear 0
    - DeltaTPS vs RPM - Gear 1 2
    - DeltaTPS vs RPM - Gear 3 4 5 6
  - Inj. Timing
    - INJ Adv.
- Ignition
  - Gear-Map# - Mode STD
  - Gear-Map# - Mode A
  - Gear-Map# - Mode B
  - IGN Advance
    - Gear N
    - Map#1
    - Map#2
    - Map#3
    - Map#4
    - Map#5
    - Map#6
    - Map#7
    - Map#8
    - Map#9
  - Volt-Dwell
    - Volt-Dwell
- Idle Speed
  - Warmup/Base Idle
    - ECT vs RPM Idle speed
  - SAP idle comp
    - SAP pressure comp
- Throttle-by-wire
  - Gear-Map#
  - ETV Base Maps
    - STD Mode
      - STD Map#0
      - STD Map#1
      - STD Map#2
      - STD Map#3
      - STD Map#4
      - STD Map#5
      - STD Map#6
    - A Mode
      - A Map#0
      - A Map#1
      - A Map#2
      - A Map#3
      - A Map#4
      - A Map#5
      - A Map#6
    - B Mode
      - B Map#0
      - B Map#1
      - B Map#2
      - B Map#3
      - B Map#4
      - B Map#5
      - B Map#6
  - ETV Decel Maps
    - STD Mode
      - STD GearN
      - STD Gear1
      - STD Gear2
      - STD Gear3
      - STD Gear4
      - STD Gear5
      - STD Gear6
    - A Mode
      - A GearN
      - A Gear1
      - A Gear2
      - A Gear3
      - A Gear4
      - A Gear5
      - A Gear6
    - B Mode
      - B GearN
      - B Gear1
      - B Gear2
      - B Gear3
      - B Gear4
      - B Gear5
      - B Gear6
ECU Settings
- Diagnostic Code Manager
- Fan Temps
- Disable Top Speed Limiter
- Default to A-Mode
- Decel Fuel Cut
- Disable Closed Loop
ECU Modules
- PC Fuel Import
- Quickshifter
Paid Features
- ActiveTune AFR Kit

14-16 MT09 - 1RC-8591A-10(EU) StockECU.ftm

ECU Mapping
- Fuel
  - TPS vs RPM
    - TPS vs RPM Cyl1
    - TPS vs RPM Cyl2
    - TPS vs RPM Cyl3
  - MAP vs RPM
    - MAP vs RPM Cyl1
    - MAP vs RPM Cyl2
    - MAP vs RPM Cyl3
  - Accel Enrichment
    - DeltaTPS vs RPM - Gear 0
    - DeltaTPS vs RPM - Gear 1 2
    - DeltaTPS vs RPM - Gear 3 4 5 6
  - Inj. Timing
    - INJ Adv.
- Ignition
  - IGN Advance
    - Gear-Map# - Mode STD
    - Gear-Map# - Mode A
    - Gear-Map# - Mode B
    - Gear N
    - Map#1
    - Map#2
    - Map#3
    - Map#4
    - Map#5
    - Map#6
    - Map#7
    - Map#8
    - Map#9
  - Volt-Dwell
    - Volt-Dwell
- Idle Speed
  - Warmup/Base Idle
    - ECT vs RPM Idle speed
  - SAP idle comp
    - SAP pressure comp
- Throttle-by-wire
  - ETV BaseMaps
    - Gear-Map#
    - STD Mode
      - STD Map#0
      - STD Map#1
      - STD Map#2
      - STD Map#3
      - STD Map#4
      - STD Map#5
      - STD Map#6
    - A Mode
      - A Map#0
      - A Map#1
      - A Map#2
      - A Map#3
      - A Map#4
      - A Map#5
      - A Map#6
    - B Mode
      - B Map#0
      - B Map#1
      - B Map#2
      - B Map#3
      - B Map#4
      - B Map#5
      - B Map#6
  - ETV DecelMaps
    - STD Mode
      - STD GearN
      - STD Gear1
      - STD Gear2
      - STD Gear3
      - STD Gear4
      - STD Gear5
      - STD Gear6
    - A Mode
      - A GearN
      - A Gear1
      - A Gear2
      - A Gear3
      - A Gear4
      - A Gear5
      - A Gear6
    - B Mode
      - B GearN
      - B Gear1
      - B Gear2
      - B Gear3
      - B Gear4
      - B Gear5
      - B Gear6
ECU Settings
- Fan Temps
- Disable Top Speed Limiter
- Disable AIS Valve
- Default to A-Mode
- Disable Closed Loop
- Disable_INJ_decel_cut
ECU Modules
- PC Fuel Import
- Quickshifter
Paid Features
- ActiveTune Kit

14-16 MT09 - 2DR-8591A-01(EU) StockECU.ftm

ECU Mapping
- Fuel
  - TPS vs RPM
    - TPS vs RPM Cyl1
    - TPS vs RPM Cyl2
    - TPS vs RPM Cyl3
  - MAP vs RPM
    - MAP vs RPM Cyl1
    - MAP vs RPM Cyl2
    - MAP vs RPM Cyl3
  - Accel Enrichment
    - DeltaTPS vs RPM - Gear 0
    - DeltaTPS vs RPM - Gear 1 2
    - DeltaTPS vs RPM - Gear 3 4 5 6
  - Inj. Timing
    - INJ Adv.
- Ignition
  - IGN Advance
    - Gear-Map# - Mode STD
    - Gear-Map# - Mode A
    - Gear-Map# - Mode B
    - Gear N
    - Map#1
    - Map#2
    - Map#3
    - Map#4
    - Map#5
    - Map#6
    - Map#7
    - Map#8
    - Map#9
  - Volt-Dwell
    - Volt-Dwell
- Idle Speed
  - Warmup/Base Idle
    - ECT vs RPM Idle speed
  - SAP idle comp
    - SAP pressure comp
- Throttle-by-wire
  - ETV BaseMaps
    - Gear-Map#
    - STD Mode
      - STD Map#0
      - STD Map#1
      - STD Map#2
      - STD Map#3
      - STD Map#4
      - STD Map#5
      - STD Map#6
    - A Mode
      - A Map#0
      - A Map#1
      - A Map#2
      - A Map#3
      - A Map#4
      - A Map#5
      - A Map#6
    - B Mode
      - B Map#0
      - B Map#1
      - B Map#2
      - B Map#3
      - B Map#4
      - B Map#5
      - B Map#6
  - ETV DecelMaps
    - STD Mode
      - STD GearN
      - STD Gear1
      - STD Gear2
      - STD Gear3
      - STD Gear4
      - STD Gear5
      - STD Gear6
    - A Mode
      - A GearN
      - A Gear1
      - A Gear2
      - A Gear3
      - A Gear4
      - A Gear5
      - A Gear6
    - B Mode
      - B GearN
      - B Gear1
      - B Gear2
      - B Gear3
      - B Gear4
      - B Gear5
      - B Gear6
ECU Settings
- Fan Temps
- Disable Top Speed Limiter
- Disable AIS Valve
- Default to A-Mode
- Disable Closed Loop
- Disable_INJ_decel_cut
ECU Modules
- PC Fuel Import
- Quickshifter
Paid Features
- ActiveTune Kit

14-16 MT09 - 2DR-8591A-20(JP) StockECU.ftm

ECU Mapping
- Fuel
  - TPS vs RPM
    - TPS vs RPM Cyl1
    - TPS vs RPM Cyl2
    - TPS vs RPM Cyl3
  - MAP vs RPM
    - MAP vs RPM Cyl1
    - MAP vs RPM Cyl2
    - MAP vs RPM Cyl3
  - Accel Enrichment
    - DeltaTPS vs RPM - Gear 0
    - DeltaTPS vs RPM - Gear 1 2
    - DeltaTPS vs RPM - Gear 3 4 5 6
  - Inj. Timing
    - INJ Adv.
- Ignition
  - IGN Advance
    - Gear-Map# - Mode STD
    - Gear-Map# - Mode A
    - Gear-Map# - Mode B
    - Gear N
    - Map#1
    - Map#2
    - Map#3
    - Map#4
    - Map#5
    - Map#6
    - Map#7
    - Map#8
    - Map#9
  - Volt-Dwell
    - Volt-Dwell
- Idle Speed
  - Warmup/Base Idle
    - ECT vs RPM Idle speed
  - SAP idle comp
    - SAP pressure comp
- Throttle-by-wire
  - ETV BaseMaps
    - Gear-Map#
    - STD Mode
      - STD Map#0
      - STD Map#1
      - STD Map#2
      - STD Map#3
      - STD Map#4
      - STD Map#5
      - STD Map#6
    - A Mode
      - A Map#0
      - A Map#1
      - A Map#2
      - A Map#3
      - A Map#4
      - A Map#5
      - A Map#6
    - B Mode
      - B Map#0
      - B Map#1
      - B Map#2
      - B Map#3
      - B Map#4
      - B Map#5
      - B Map#6
  - ETV DecelMaps
    - STD Mode
      - STD GearN
      - STD Gear1
      - STD Gear2
      - STD Gear3
      - STD Gear4
      - STD Gear5
      - STD Gear6
    - A Mode
      - A GearN
      - A Gear1
      - A Gear2
      - A Gear3
      - A Gear4
      - A Gear5
      - A Gear6
    - B Mode
      - B GearN
      - B Gear1
      - B Gear2
      - B Gear3
      - B Gear4
      - B Gear5
      - B Gear6
ECU Settings
- Fan Temps
- Disable Top Speed Limiter
- Disable AIS Valve
- Default to A-Mode
- Disable Closed Loop
- Disable_INJ_decel_cut
ECU Modules
- PC Fuel Import
- Quickshifter
Paid Features
- ActiveTune Kit

14-16 MT09 - 2DR-8591A-10(EU) StockECU.ftm

ECU Mapping
- Fuel
  - TPS vs RPM
    - TPS vs RPM Cyl1
    - TPS vs RPM Cyl2
    - TPS vs RPM Cyl3
  - MAP vs RPM
    - MAP vs RPM Cyl1
    - MAP vs RPM Cyl2
    - MAP vs RPM Cyl3
  - Accel Enrichment
    - DeltaTPS vs RPM - Gear 0
    - DeltaTPS vs RPM - Gear 1 2
    - DeltaTPS vs RPM - Gear 3 4 5 6
  - Inj. Timing
    - INJ Adv.
- Ignition
  - IGN Advance
    - Gear-Map# - Mode STD
    - Gear-Map# - Mode A
    - Gear-Map# - Mode B
    - Gear N
    - Map#1
    - Map#2
    - Map#3
    - Map#4
    - Map#5
    - Map#6
    - Map#7
    - Map#8
    - Map#9
  - Volt-Dwell
    - Volt-Dwell
- Idle Speed
  - Warmup/Base Idle
    - ECT vs RPM Idle speed
  - SAP idle comp
    - SAP pressure comp
- Throttle-by-wire
  - ETV BaseMaps
    - Gear-Map#
    - STD Mode
      - STD Map#0
      - STD Map#1
      - STD Map#2
      - STD Map#3
      - STD Map#4
      - STD Map#5
      - STD Map#6
    - A Mode
      - A Map#0
      - A Map#1
      - A Map#2
      - A Map#3
      - A Map#4
      - A Map#5
      - A Map#6
    - B Mode
      - B Map#0
      - B Map#1
      - B Map#2
      - B Map#3
      - B Map#4
      - B Map#5
      - B Map#6
  - ETV DecelMaps
    - STD Mode
      - STD GearN
      - STD Gear1
      - STD Gear2
      - STD Gear3
      - STD Gear4
      - STD Gear5
      - STD Gear6
    - A Mode
      - A GearN
      - A Gear1
      - A Gear2
      - A Gear3
      - A Gear4
      - A Gear5
      - A Gear6
    - B Mode
      - B GearN
      - B Gear1
      - B Gear2
      - B Gear3
      - B Gear4
      - B Gear5
      - B Gear6
ECU Settings
- Fan Temps
- Disable Top Speed Limiter
- Disable AIS Valve
- Default to A-Mode
- Disable Closed Loop
- Disable_INJ_decel_cut
ECU Modules
- PC Fuel Import
- Quickshifter
Paid Features
- ActiveTune Kit

Nie widzisz swojego numeru części?

OSTRZEŻENIE tego ECU nie można odczytać!
Będziemy potrzebować nowych numerów części ECU tego typu, które zostaną nam przesłane, zanim będą mogły zostać wykorzystane.
Jeśli chcesz pomóc, zapewnimy Twój zestaw tuningowy bezpłatnie!
Prześlij nam swój ECU z adresem zwrotnym i danymi modelu rynkowego.

Możliwość dodawania komentarzy nie jest dostępna.

2014-2021 Yamaha FZ/MT-09 Data Link Bench ECU Flashing Kit (U.S.)

$450.00

Zestaw do flashowania ławki ECU łącza danych Zawiera:

Znajdź swój numer części ECU poniżej

Nie widzisz swojego numeru części?

Mój koszyk

Moje konto

(888) 543-6302

Mon-Fri 9AM-5PM PST

sales@ftecu.com

FTECU Inc.

3688 Research Way STE 5

Carson City, NV 89706, USA

Warunki usługi

Polityka prywatności

© Prawo autorskie 2024